TX - Storm Commando

Sith Lord detachment : http://s11.zetaboards.com/501st_Spec_Ops_Det/index/

For help with this costume, please contact: No contact available at this time

A Storm Commando costume MUST have:

Helmet

  • Black licensed (Don Post, Altmann’s, Rubies, etc) or fan-made helmet with a flat green, smoked, black, or mirrored lens. It must include a grey and black striped "nose" decal or paint. The face of the snout area must be painted medium grey, outlined with a black stripe, and contain a dark grey snout greeblie with black aerator. There should be a medium grey "squared fish hook" insignia decal on lower forward corner of left visor blind. There are two medium grey trapezoidal rear helmet decals with thin black vertical stripes. And there are black vent stripes on rear helmet hump.

Neckseal

  • Black, horizontally ribbed (stormtrooper style) neck seal, extending from the base of the neck to the top of the throat.

Undersuit

  • Black, zippered cloth one-piece long sleeve coverall, jumpsuit, flight suit or racing suit.

Knee armour / protectors

  • Black armoured pieces with sloped end above the knee.

Chest / back plates

  • Black Scout breastplate (with dark grey badge stripe on right breast) and Scout back plate (with "bullet tank", topped with a black resin topper piece) connected to each other on the sides and over each shoulder black elastic. The tank must have a pinstripe and anywhere from 4 to 6 "rank stripes" on right side of the tank.

Shoulder bells

  • Black armoured scout shoulder bells.

Bicep armour / protectors

  • Black armoured plates with black "T-bit" detail (secured around the arm with a black elastic strap).

Forearm armour / protectors

  • Black armoured plates (secured around the arm with a black elastic strap).

Cumberbund

  • Black duck cloth scout cumberbund with standard imperial pouches that are black in colour. When worn the slanted pouch flap sides must face outwards.

Belt

  • Black 2" webbing belt with Scout buckle on the face and 4 utility cases attached to the belt sides. There should be a black rear belt canister with a gray ribbed hose segment enclosed within a rectangular box attached to the back of the belt. It should also have two trapezoidal hip boxes hanging from each side of the belt from two straps that connect with black plastic clips. These straps should be black in colour to match the pouches.

Gloves

  • Black leather or leather-like enclosed fingered, non-textured gauntlet style gloves with no extraneous buckles, straps, or zippers. Ribbing should be present over the knuckles portion of the gloves.

Boots

  • Black textureless leather or leather-like calf high laceless boots with a wrapping over the instep black soles of working boots. Rear calf enclosure of boot may be zippered or secured with Velcro, but neither fixture should be visible.

A Storm Commando costume SHOULD have:

Helmet

  • If you have a Don Post or Rubies hemet then it is recommended that you remove the company logo on the back of the neck. It is also recommended that you paint the helmet white to prevent discolouration due to aging vinyl.The thin original lens should be replaced with a sturdier, thicker, and darker lens. The visor hinge bolts should be swapped for correct round, flat ones. The snout aerator should be replaced with a more detailed replacement snout detail assembly.

Undersuit

  • All zippers painted black so as to be less visible.

Voice amplifier

  • Such as a ROM / FX or similar system

Hand plates

  • Black Stormtrooper style

Shin armour

  • Resembling that worn by Jango Fett but in black

A Storm Commando costume MAY have:

Helmet

  • Red opaque or reflective helmet lens.

Bandoliers

  • Two red bandoliers crossing in the front and back. These should have hard ammo packs and look much like Chewbacca’s but with electronic portions near the buckles.

Belt

  • Red buckle on belt.

Thigh armour

  • Resembling that worn by Jango Fett but in black, which would only cover the front half of the leg. It would be attached with black elastic/fabric/leather straps running around the back.

Forearm armour

  • A seam should run along the inside of the forearm armour with a knob resembling a computer key near the inside of the elbow.

Blaster

  • DTL-19 blaster rifle.

Holster

  • Black leather or leather-like holster, worn on the right side of belt. It can be mounted to the belt from behind with two rivets or Chicago screws or have loops that go over the belt. It should also have a strap around the thigh armour.

There is also an “Elite” version of the Commando that would have:

Neck seal

  • Either a stormtrooper style ribbed neckseal or a black balaclava.

Forearm armour

  • Black stormtrooper style forearm armour.

Cod armour

  • Stormtrooper style cod-piece that curves inward as it goes down and does not extend horizontally past the groin. It should reach from the utility belt to the point where the pant legs meet.

Bicep armour

  • Either standard black stormtrooper style bicep armour or scout style bicep armour.

Thigh armour

  • Black stormtrooper-style thigh armour.

Gloves

  • Black leather or leather-like gloves with minimal stitching. Gauntlet style are acceptable, but must be tucked into forearm armour.

Boots

  • Smooth black leather or leather-like boots with no ornamental stitching or other adornments. If they are taller than ankle height, they must be tucked under shin armour.
Share