TR - Royal Guard - Carnor Jax

Sovereign Protectors : http://www.forcepike.net

For help with this costume, please contact: TR-2011

A Crimson Empire Carnor Jax costume MUST have:

Helmet

  • Must be of solid construction based upon design of the Royal Guard characters with modifications to personify the “Sovereign Protectors”. The modification/addition is the vertical Mohawk that runs between the front and rear ridges of the normal Royal Guard helmet and can be seen in several panels of the CE/CE2 visual reference. Visor should have a red, non-reflective lens that allows maximum visibility but hides the wearer’s features. The center part of the helmet with the visor should come up to a triangular point.
    Helmet

Bodysuit

  • Must be constructed of red form fitting material (ex: lycra/spandex) with black accents running vertical along the torso to the thigh.
    Bodysuit

Cloak / Cape

  • The outer shell must be constructed of black non-reflective, heavyweight material; inner lining must be constructed also of black, lightly-reflective material. Cloak / Cape must hang no higher than the individual wearer’s calves and no lower than the individual wearer’s ankles. Cloak / Cape must have at least one opening to allow for movement and ability to be worn draped over one shoulder. Cloak / Cape closure method cannot be part the bodysuit or armour and must function separately.

Body armour

  • Must be gloss black in colour and consist of the following components:
    • Shoulder Bells: Must be shaped to mimic the visual reference and must have a “scalloped” layer beneath the first layer.
    • Backplate: Must be shaped to mimic the visual reference.
    • Chest Plates: Must be shaped to mimic the visual reference and must contain or show bi-lateral division of the individual plates.
    • Abdominal Plates: Must be shaped to mimic the visual reference and must contain or show sectional division between plates. A minimum of 3 (three) abdominal plates is required but no more than 8 (eight).
    *Note: All body armour components must be secured to the costumer’s bodysuit by either 1) harness/strapping system, 2) Velcro/Snaps, and cannot hang free.
    Body armour

Vambraces / Gauntlets

  • Must be shaped to mimic the visual reference and gloss black in colour. Must consist of a minimum of 4 (four), but not more than 8 (eight), raised ridges running vertically along the outer side of the vambrace/gauntlet.

Gun belt

  • Must be black in colour and consist of; holster, a minimum of 2 (two) but not more than 3 (three) pouches and a buckle. The buckle and pouch design must mimic the visual reference.

Blaster

  • The Crimson Empire comics depict the DH-17 heavy blaster pistol as being their blaster. Either the MR edition or Hasbro Toy DH-17 (modified) is acceptable.

Boots

  • Must be black in colour and come to a point at the opening at the top of the wearer’s thigh. Boots must reach a length higher than the wearer’s knees but must be lower than the wearer’s groin. They should have a relatively conservative heel, no visible straps/buckles, or ornamental stitching.

Gloves

  • Must be red in colour and match the visual reference. Gloves must cover the wearer’s hand. Gloves must have a minimum of 1 (one) accent; 1) horizontal ribbing across the back of the hand, or, 2) circular “knuckle pads” across the fist of the glove.
    Gloves

Force glaive

  • Should be no smaller than 1ft/30.48cm in length taller than the costumer from blade tip to blade tip, and mimic the visual reference with detail on the grip area and blade pommels.
    Force glaive

A Crimson Empire Carnor Jax costume SHOULD have:

Cloak / Cape

  • The outer shell should be constructed of black velvet; inner lining must be constructed of black cloth material.
Share